Analog way SMS100 Smart Scaler, Руководство по эксплуатации

Страница: 23 / 29

ANALOG WAY
SMS100 - ED 07/01 PAGE 23
9) REMOTE CONTROL RS-232 (continued)
9-2) HOST / SMART SCALER™ COMMUNICATION (continued)
d OUTPUT COMMANDS :
•
o command is used to select the Output Sync. type.
DECIMAL VALUE SELECTION
(OUTPUT SYNC TYPE)
RESPONSE
0 SEPARATE H & V SYNC. OSIG0
1 COMPOSITE SYNC. OSIG1
•
O command is used to select the output format.
Use the following table when the u command (Output Frame Rate) is set on Video In Rate (SSYNC3).
DECIMAL VALUE SELECTION (OUTPUT FORMAT) RESPONSE
0 VGA (640 x 480) at 50Hz or 59.94 Hz OFMT0
1 PLASMA 42” (852 x 480) at 50Hz or 59.94 Hz OFMT1
2 SVGA (800 x 600) at 50Hz or 59.94 Hz OFMT2
4 XGA (1024 x 768) at 50Hz or 59.94 Hz OFMT4
5 PLASMA 50” (1280 x 768) at 50Hz or 59.94 Hz OFMT5
6 SXGA (1280 x 1024) at 50Hz or 59.94 Hz OFMT6
14 HDTV 720 P (1280 x 720) at 50Hz or 59.94 Hz OFMT14
15 QUAD 960 (1280 x 960) at 50Hz or 59.94 Hz OFMT15
16 D-ILA (1365 x 1024) at 50Hz or 59.94 Hz OFMT16
Use the following table when the u command (Output Frame Rate) is set on Internal Rate (SSYNC0).
DECIMAL VALUE SELECTION (OUTPUT FORMAT) RESPONSE
0 VGA (640 x 480) at 60Hz OFMT0
1 PLASMA 42” (852 x 480) at 60Hz OFMT1
2 SVGA (800 x 600) at 60Hz OFMT2
3 MAC (640 x 480) at 66Hz OFMT3
4 XGA (1024 x 768) at 60Hz OFMT4
5 PLASMA 50” (1280 x 768) at 56Hz OFMT5
6 SXGA (1280 x 1024) at 60Hz OFMT6
7 VGA (640 x 480) at 75Hz OFMT7
8 PLASMA 42” (852 x 480) at 72Hz OFMT8
9 SVGA (800 x 600) at 75Hz OFMT9
10 MAC 16” (832 x 624) at 75Hz OFMT10
11 XGA (1024 x 768) at 75Hz OFMT11
12 PLASMA 50” (1280 x 768) at 75Hz OFMT12
13 SXGA (1280 x 1024) at 75Hz OFMT13
•
u command is used to select the Output Frame Rate.
DECIMAL VALUE SELECTION
(OUTPUT RATE)
RESPONSE
0 INTERNAL RATE SSYNC0
3 VIDEO IN RATE SSYNC3