In the Control Menu, you will find all setup which cannot be classified in the image, layer, input or output
menu.
Version:
it indicates the actual software version of the SQD200.
it can help if you need to contact our technical support team.
RS232/LAN:
choose your connection type when controling by a R.C.S or an external program.
LAN SETUP:
in this menu, you can adjust every settings related in the network
HDCP Summary:
show all HDCP Inputs/Outputs Status
Sync. Loss:
see p.30
Auto Lock:
enable/disable the source selection when no-synch are detected
Auto Take
:
allow the unit to take by itself as soon as it detects a change (source, layer, position...)
Preset Toggle:
enable this feature to put you last program on your preview after a T
AKE
T Bar:
enable/disable the virtual T-Bar (it will appear in the Main menu)
Transparent Bkngd:
see p.40
Dynamic Fit:
see p.39
Preview Id:
see p.40
Freeze mode:
choose between 2 modes: Single Layer Freeze Mode or All Layers Freeze Mode
Key Locking:
enable to lock a part or all your front panel
LCD Brightness:
adjust the LCD Brightness
Key Brightness:
adjust the Key Brightness
Standby:
parameters for the standby mode
Layer parameters
:
allow you to reset at the original size/position all layers
Erase Memories:
erase all image settings: blanckings, colors...
Default values:
put every internal values to factory default (except Ethernet values).
Using the Control Menu
44
