4-3. WORKING WITH THE SQD200
Operating modes
The
SQD200
offers 1 mode to work from: the
Quadravision Mode
.
Resetting default values
It is strongly recommended resetting all of the default values of your
SQD200
unit before setting up your
shows and events. To do so, press the
[EXIT/MENU]
button and select
Control
in the menu by rotating the
corresponding knob. Then press the
[ENTER]
button to enter the
Control
sub-menu. Select
Default Values
by rotating the scroll knob, and press the
[ENTER]
button to enter your choice to restart your
SQD200
with
its factory settings. This operation should take approximately 30 seconds
.
Your machine will reboot after the reset has taken place.
SQD200 color codes
Analog Way
engineers have developed a handy, user friendly way of identifying machine status on the front
panel, via the use of color codes on the buttons of the machine. All new
Analog Way
machines use the same
codes, for quick recognition of the status of any device of the range, at any given time.
For the
SQD200
, button color codes are as follows:
-
Sources on the Main output are indicated in
red
when active,
-
Sources on the Preview output are indicated in
green
when active,
-
Buttons in the layer section turn
red
or
green
, depending on whether the selected layer is active in
respectively the Main or Preview window,
-
Menu buttons are indicated in
green
,
-
Selecting a button with an available source or function will cause that button to blink
green
on the
preview, or
red
once it is on the Main output,
-
TAKE button reacts as follows:
• If the take function is available, the button will appear in
green
.
• When the take function is active, it will light up
red
.
#1 = Source, Layer or Window is on Main
#2 = Freeze enable
#1 = Source or Layer is on Preview
#2 = Function available for modification
Button available for selection
Active Layer or Source for modification on Main
Active Layer or Source for modification on Preview
Stand-by button
Solid red:
Solid green:
Dim green:
Blinking red:
Blinking green:
Dim red:
29
