Analog way NATIX NTX8022A, Руководство пользователя

Страница: 46 / 55

Chapter 7 : REMOTE CONTROL PROGRAMMER'S GUIDE (continued) NATIX™
PAGE 46
7-4. COMMANDS AND RESPONSES TABLE (continued)
VALUE ASCII
COMMAND
RESPONSE COMMAND
DESCRIPTION
TYPE
MIN MAX DESCRIPTION
CONTROLS COMMANDS
ja TALA Input number for TALLY1 Rd/Wr 1 7
jb TALB Input number for TALLY2. Rd/Wr 1 7
jc TALC Input number for TALLY3. Rd/Wr 1 7
0 = input #1.
.......
7 = input #8.
JA TAON TALLY1 status. Rd 0 1 0 = TALLY1 inactive 1 = TALLY1 active.
JB TBON TALLY2 status.
Rd
0 1 0 = TALLY2 inactive 1 = TALLY2 active.
JC TCON TALLY3 status. Rd 0 1 0 = TALLY3 inactive 1 = TALLY3 active.
QE EPD 2:2 pull down correction. Rd/Wr 0 1 0 = off 1 = auto.
ye EPOS Erase all memories. Rd/Wr 0 1 1 = erase all memories (automatic reset).
yd DEMO Demo mode. Rd/Wr 0 1 0 = demo mode inactive.
1 = demo mode active.
yi EISP Auto-lock Rd/Wr 0 1 0 = off 1 = on.
fr BFCR Red level adjustment of the FADE. Rd/Wr 0 255
fb BFCB Blue level adjustment of the FADE. Rd/Wr 0 255
OUT 1 fg BFCG Green level adjustment of the FADE. Rd/Wr 0 255
fR bfcr Red level adjustment of the FADE. Rd/Wr 0 255
fB bfcb Blue level adjustment of the FADE. Rd/Wr 0 255
OUT 2 fG bfcg Green level adjustment of the FADE. Rd/Wr 0 255
xI I_ Identification number. Rd 0 65535
xK K_ "K" Firmware Version. Rd 0 65535
xE E_ "E" Firmware Version. Rd 0 65535
xF F_ "F" Firmware Version. Rd 0 65535
xP P_ "P" Firmware Version.
Rd
0 65535
xV V_ "V" Firmware Version. Rd 0 65535
Values displayed in hexadecimal in the device.
xU VERU Update version. Rd 0 65535 Example: VERU104 = version 1.4
Y FRES DEFAULT VALUE. Rd/Wr 0 1 1 = Default value action (automatic reset).
OTHERS COMMANDS
N TBP T-BAR position. Rd/Wr 0 255
ub TBA Executed percentage of the effect. Rd 0 16383 0 = 0% 16383 = 100%
uv TBAV T-BAR availability. Rd 0 1 0 = T-BAR unavailable. 1 = T-BAR available.
? DEV Device type. Rd 0 65535 31 = NTX8022A.
# #1,....#0 Send all device parameters.
Rd
NOTE: ( M ) = output 1. Rd/Wr = Read and write command.
( P ) = output 2. Rd = Read only command.