NATIX™
Chapter 3 : OPERATING MODE (continued)
PAGE 17
3-1. OPERATING WITH THE REMOTE CONTROL SOFTWARE (continued)
3-1-2. COMMUNICATION SETUP (continued)
•
CASE OF LAN PORT:
c
Connect the control device to the
NATIX
™
with the RS-232 port as indicated in the previous page, then
configure the LAN communication port (local address & port, remote address & port, netmask and gateway) of
the device with the Remote Control Software (
CONTROL menu > NATIX LAN setup
).
d
Connect the LAN port (RJ45 connector) of the device to your network according to your installation.
e
Select the LAN communication port of the device with the remote control software (
CONTROL menu >
RS232/LAN setup >LAN setup
) and configure the control device (
Local port, Remote IP address & Remote
Port
). Click on
Apply
to setup the new values. The software will also display
Device connected
. Then you can
disconnect the RS232 cable.
Figure 14
Содержание NATIX NTX8022A
Страница 1: ...ANALOG WAY NATIX EDITION 12 04 MODELS NTX8022A NTX8022A D User s Manual...
Страница 2: ......
