Analog way NATIX NTX8022A, Руководство пользователя

Страница: 8 / 55

Chapter 1 : INTRODUCTION (continued) NATIX™
PAGE 8
1-3. REFERENCES
REFERENCES DESIGNATIONS
NTX8022A NATIX
™
(without option)
NTX8022A-D NATIX
™
with optional SDI & DVI inputs.
OPT-iX-SDTVD1 Optional SDTV video output (COMPOSITE VIDEO + S.VIDEO + YUV + SDI).
1-4. OPTIONAL ACCESSORIES
REFERENCES DESIGNATIONS
RK8022 Remote keypad for CENTRIX
™
/ EVENTIX
™
/ NATIX
™
.
RK8022-T Remote keypad with T-BAR for CENTRIX
™
/ EVENTIX
™
/ NATIX
™
.
TRC8022 TripliX Remote Console for 3 x CENTRIX
™
/ EVENTIX
™
/ NATIX
™
.
1-5. INSTALLATION
IMPORTANT: Please read all of the safety instructions (pages 4 to 6) before starting.
•
Table top mounting: The device can be used directly on a table: the unit is equipped with 4 plastic feet.
•
Rack mounting: The device is compatible with a 19” enclosure. Please follow the instructions below to install the
device in a 19” rack.
c Place the device in your rack.
NOTE: Your rack must be equipped with some braces.
d Attach the device to the rack by using 4 screws in the front panel holes (screws are not
included).
e Connect all of the cables of the device and attach them to the rack with some tie wraps.
Figure 1
IMPORTANT: - The openings in the side and in the rear panel are for cooling. Do not cover these openings.
- Be sure that no weight in excess of 2 kg (4.4 Lbs.) is added onto the NATIX™.
- The maximum ambient operating temperature must not exceed 40 °C (104 °F).
- The rack and all mounted equipment in it must be reliably grounded to national and local
electrical codes.