29
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
5.1.4
Display configuration
Fig. 15 -
Display configuration
In the
Display configuration
menu, set Auto mode for the whole output card or Manual display mode per
output plug:
Tip
: Use the buttons
Copy
,
Paste
and
Copy to all
for Displays using identical settings.
5.1.4.1
Set Auto mode for the whole output card
In Auto mode,
sets all plugs of the same output card (GPU) to follow EDID.
Tip
: In Auto mode, connect and power all the relevant displays before booting the media server.
1.
In
Setup
, select Auto.
2.
Per output plug, select Auto to follow EDID (or Disable the output if needed).
3.
If needed, select
Signal: HDMI
to force the HDMI signal on any DisplayPort output (adapter needed).
5.1.4.2
Set Manual mode per output plug
In Manual mode, set each output plug manually.
1.
In
Setup
, select Manual.
2.
Per output plug, select the Display mode:
o
Disabled
: disable the output
o
Manual
: set the output resolution and refresh rate manually
o
Custom
: select a custom display configuration
o
Special
: select a preset mode for display signal splitters (Analog Way DPH104, Matrox TH2GO
and DH2GO)
3.
If needed, select
Signal: HDMI
to force the HDMI signal on any DisplayPort output (adapter needed).
