9
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
2
Hardware Specifications
2.1
General safety instructions
2.1.1
English
All of the safety and operating instructions should be read before the product is operated and should be
maintained for further reference. Please follow all of the warnings on this product and its operating
instructions.
•
WARNING
: Not suitable for children. To prevent the risk of electric shock and fire, do not expose this device
to rain, humidity or intense heat sources (such as heaters and direct sunlight). This equipment is not suitable
for use in locations where children are likely to be present.
•
INSTALLATION
: Slots and openings in the device are provided for ventilation and to avoid overheating.
Make sure the device is never placed near a textile surface that could block the openings. Also keep away
from excessive dust, vibrations and shocks.
•
POWER
: Only use the power supply indicated on the device of the power source. Devices equipped with a
grounding plug should only be used with a grounding type outlet. In no way should this grounding be
modified, avoided or suppressed. Connection of equipment to main supply must be after branch circuit
breaker of the building installation.
For equipment identified with the symbols above, grounding is mandatory before plug connection.
Use a grounding cable to connect a screw on the unit chassis to ground.
•
POWER CORD
: The device is equipped with one or multiple detachable power cords.
A device identified with the symbol above indicates that the equipment has multiple power cords. To remove
mains, disconnect all power cords at appliance coupler.
Caution:
The power cords constitute the only mean to completely disconnect the equipment from the main power.
Use the following guidelines
:
- The equipment connected to the network must have a release system easily accessible and located
outside the unit.
- Unplug the power from mains if the device will not be used for a few days or more.
- To unplug the power cords; do not pull on the power cords but always on the plug itself.
- The outlet should always be near the device and easily accessible.
- Power supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them.
If one of the power supply cords is damaged, unplug the device. Using the device with a damaged power
supply cord may expose your device to electric shocks or other hazards. Verify the condition of the power
supply cords periodically. Contact your dealer or service center for replacement if damaged.
•
CONNECTIONS
: All inputs and outputs (except for the power input) are Electrical energy source class 1 (ES1)
as defined in IEC/UL 62368-1 edition 2.
ES1 limits: 60Vdc or 30V rms/ 42.4V peak.
•
SERVICING
: Disconnect all power supply cords from main before servicing.
According to IEC 62368-1 standard, an ordinary person is authorized to:
- Open the front panel cabinet and clean the air filter (depending on the model)
- Change a removable power supply (depending on the model)
