40
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
5.1.10.2
Legacy backup tool
To clone all media files from the media server to another Picturall media server without continuous
synchronization, the legacy backup tool can be used.
The following example shows how to back from a Server A to a Server B.
1.
On the Web configurator of the Picturall media server to use as the source of the synchronization,
set the system role to
Server
.
2.
Make sure the two servers have the same software version (latest if possible).
3.
Make sure the two servers have Picturall Commander installed in same version (latest if possible).
4.
Create a show and transfer some media files on Server A.
5.
Make sure that Server B is up and running.
6.
On a web browser, enter the IP address of Server A in the address bar.
7.
Go to
Tools
/
Backup
.
8.
Select Server B in the dropdown list or enter the IP address of server B then click
Save
.
Server A sends all media files and shows to Server B (configuration settings are not duplicated and
existing media files on server B are not deleted).
9.
After the transfer is complete, restart Server B and make sure that it has the same shows and media
data as Server A.
Note
: The Legacy backup tool will be removed in a future version.
5.1.11
Import and Export configuration
Import and backup server configuration is only possible for media servers with same capabilities.
It is also support between First generation and Mark II media servers.
5.1.11.1
Export configuration (save)
Tip
: Export server configuration before updating the Server Software as this deletes Configuration options.
To save the current configuration:
1.
On a web browser, enter the media server IP address in the address bar.
2.
Go to
Configurator
or
Configure Server
.
3.
Go to
Export configuration
.
4.
Choose the configuration parameters to be saved.
5.
Click
Export configuration.
The Configuration is saved in a
PSC
file.
5.1.11.2
Import configuration (load)
1.
On a web browser, enter the media server IP address in the address bar.
2.
Go to
Configurator
or
Configure Server
.
3.
Go to
Import configuration
.
4.
Choose the PSC file to import.
5.
Choose the configuration parameters to load.
6.
Click
Import configuration.
