Analog Devices EVAL-AD5753SDZ, Руководство пользователя

Страница: 6 / 23

UG-1492 EVAL-AD5753SDZ User Guide
Rev. 0 | Page 6 of 22
SOFTWARE QUICK START PROCEDURES
INSTALLING THE ACE SOFTWARE AND AD5753
PLUGINS
The EVAL-AD5753SDZ software uses the Analog Devices ACE
software. For instructions on how to install and use the ACE
software, go to www.analog.com/ACE .
When the installation is finished, open the ACE software to
open the EVAL-AD5753SDZ plugin (see Figure 2).
17
332
-00
2
Figure 2. EVAL-AD5753SDZ Plugin Window
INITIAL SETUP
To set up the EVAL-AD5753SDZ with the ACE software, take
the following steps:
1. Connect one end of the USB cable to the PC, and connect
the other end to the
EVAL-SDP-CS1Z ( SDP-S ).
2. Connect the EVAL-SDP-CS1Z ( SDP-S ) to the EVAL-
AD5753SDZ. The PC recognizes the EVAL-AD5753SDZ.
3. Power up the EVAL-AD5753SDZ with the power supplies
described in the Power Supplies section.
4. If not opened already, open the ACE software. The EVAL-
AD5753SDZ appears in the Attached Hardware section of
the ACE software window.
5. The first time the EVAL-AD5753SDZ is set up, the plugin
may need to be installed. If the plugin appears as shown in
Figure 6, then go to Step 7. If the plugin appears as shown
in Figure 3, click on the button circled in red to open the
pop-up window shown in Figure 4, then click
Yes .
6. A new window (see Figure 5) opens. Select the
Board.AD5753 plugin and click the Install Selected button.
The installed EVAL-AD5753SDZ plugin displays as shown
in Figure 6.
17
332
-00
3
Figure 3. EVAL-AD5753SDZ Plugin Not Installed
17
33
2-
0
04
Figure 4. Installing the Plugin Pop-Up Window
1733
2-
005
Figure 5. Plugin Manager Window