UG-1492
Rev. 0 | Page 10 of 22
173
32
-00
9
CONFIGURING THE EVALUATION BOARD
An initial configuration wizard is available when opening the
plugin. The initial configuration wizard allows
configuration of the
and provides configuration of the
clock output in the General-Purpose Configuration Register 1,
the dc-to-dc settings, the DAC configuration, and the DAC input
register. Click the
Apply
button to initiate the configured
settings in the order of the recommended power-up sequence
described in the
data sheet.
DC-TO-DC CONVERTER SETTINGS
If the V
DPC+
pin is not tied directly to the AVDD1 pin, enable the
dc-to-dc converter for correct operation. Complete this step
before configuring the DAC output. The
DC-DC Configuration
pop-up menu, shown in Figure 10, contains the dc-to-dc settings
required to configure the
output correctly. After the
proper settings are selected, click the
Close
button and then click
Apply Changes.
17
33
2
-01
0
Figure 10.
DC-DC Configuration
Pop-Up Menu
