Anakin Club Racer SKY-HERO, Руководство пользователя

Страница: 22 / 35

22
2. On the following screen, Click Next 1. On the configuration tab (bottom of OpenPilot
Screen), click the “Input” tab on the left and then
click on “Start Transmitter Setup Wizard“
4. On the Transmitter Mode Screen, Select the
Mode related to your Transmitter setup (in this
example we have selected “Mode 2”), Click Next
3. On the Transmitter Type screen, ensure that
“Acro” is selected and Click Next
TRANSMITTER SETUP WIZARD
Now it’s time to calibrate the radio. Turn your radio transmitter on, ensure that you do not have
your propellers attached to the Anakin Club Racer and then connect the Lipo Battery.
- If your computer is still connected via the usb lead to the CC3D then go to step 2 below
- If your micro usb lead is not already connected between the CC3D’s usb port and your computer – you
should ensure that the Open Pilot software is not running, and then re-connect it the usb lead. Wait a
couple of minutes for the CC3D board to be recognised then re-open the Open Pilot software. Go to
step 1 below.
Wait a couple of minutes for the CC3D board to be recognised (the light on the CC3D stops flashing
rapidly), then re-open