Anakin Club Racer SKY-HERO, Руководство пользователя

Страница: 11 / 35

11
Pass the 3 cables up from lower part of the frame to the top of the frame.
The Yellow video out cable can then be soldered or connected to the VTX video input cable.
If you are using the Sky-Hero VTX, and you do not want to do any soldering, you can cover the connector
from the camera in heat shrink tubing and insert it into the VTX connector
(connecting to the yellow wire pin)
Connect the Camera’s “Power in” connector to the CC3D M6 port, ensuring that the black wire is at
the bottom
BATTERY VOLTAGE OUT (2-4S)
(SAME VOLTAGE AS BATTERY - MAY BE
SUITABLE TO POWER YOUR VTX,
CHECK YOUR VTX VOLTAGE
REQUIREMENTS)