Configure Tab
53
NXA-WAPZD1000 ZoneDirector Smart WLAN Controller
Creating a WLAN
To create a new WLAN:
1.
Go to Configure > WLANs. The first table displays all WLANs that have already been created by the
NXA-WAPZD1000.
2.
In the top section (WLANs), click Create New. The Create New workspace displays the following
(FIG. 20):
The WLAN Create New workspace includes the following configuration options used to customize your new
WLAN:
FIG. 20
WLANS - Create New
Create New WLAN Options
Option
Description
General Options:
Enter WLAN name and description.
• Name/ESSID: Type a short name (2-31 characters/numbers) for this
WLAN.
• Description: Enter a brief description of the qualifications/purpose for
this WLAN, e.g., “Engineering” or “Voice.”
WLAN Usages:
Select usage type (standard, guest access, hotspot).
Authentication Options:
Select authentication method (open, shared key, 802.1X EAP, MAC
address).
Encryption Options:
Select encryption method (WPA, WPA2, WPAMixed, WEP), encryption
algorithm and passphrase or WEP key.
If any authentication method other than “open” or “MAC address” is
selected, the “none” option for encryption method is disabled.
Options:
Select whether Web-based authentication (captive portal) will be used,
and which type of authentication server will be used to host credentials
(local database, Active Directory, RADIUS, LDAP).
Also, enable or disable Wireless Client Isolation, Zero-IT Activation,
Dynamic PSK and Priority for this WLAN.
Содержание NXA-WAPZD1000
