Interface Configuration
77
Instruction Manual - NXA-ENET8-POE+
Perform these steps to display LACP port counters:
1.
Click
Interface
>
Trunk
>
Dynamic
.
2.
Select
Configure Aggregation Port
from the Step list.
3.
Select
Show Information
from the Action list.
4.
Click
Counters
.
5.
Select a group member from the Port list.
Displaying LACP Settings and Status for the Local Side
Use the Interface > Trunk > Dynamic (Configure Aggregation Port - Show Information - Internal) page to display the configuration
settings and operational state for the local side of a link aggregation.
The following table lists the options on this page:
FIG. 74
Displaying LACP Port Counters
LACP Internal Configuration Information
LACP System Priority
LACP system priority assigned to this port channel.
LACP Port Priority
LACP port priority assigned to this interface within the channel group.
Admin Key
Current administrative value of the key for the aggregation port.
Oper Key
Current operational value of the key for the aggregation port.
LACPDUs Interval
Number of seconds before invalidating received LACPDU information.
Admin State, Oper State
Administrative or operational values of the actor's state parameters:
• Expired - The actor's receive machine is in the expired state;
• Defaulted - The actor's receive machine is using defaulted operational partner information,
administratively configured for the partner.
• Distributing - If false, distribution of outgoing frames on this link is disabled; i.e., distribution is
currently disabled and is not expected to be enabled in the absence of administrative changes or
changes in received protocol information.
• Collecting - Collection of incoming frames on this link is enabled; i.e., collection is currently
enabled and is not expected to be disabled in the absence of administrative changes or changes
in received protocol information.
• Synchronization - The System considers this link to be IN_SYNC; i.e., it has been allocated to the
correct Link Aggregation Group, the group has been associated with a compatible Aggregator,
and the identity of the Link Aggregation Group is consistent with the System ID and operational
Key information transmitted.
• Aggregation - The system considers this link to be aggregatable; i.e., a potential candidate for
aggregation.
• Long timeout - Periodic transmission of LACPDUs uses a slow transmission rate.
• LACP-Activity - Activity control value with regard to this link. (0: Passive; 1: Active)