Basic Administration Protocols
229
Instruction Manual - NXA-ENET8-POE+
Perform these steps to show collected RMON statistical samples:
1.
Click
Administration
>
RMON
.
2.
Select
Configure Interface
from the Step list.
3.
Select
Show Details
from the Action list.
4.
Select a port from the list.
5.
Click
Statistics
.
Setting a Time Range
Use the Administration > Time Range page to set a time range during which various functions are applied, including applied ACLs or
PoE.
Command Usage
If both an absolute rule and one or more periodic rules are configured for the same time range (i.e., named entry), that
entry will only take effect if the current time is within the absolute time range and one of the periodic time ranges.
A maximum of eight rules can be configured for a time range.
The following table lists the options on this page:
Perform these steps to configure a time range:
1.
Click
Administration
>
Time Range
.
2.
Select
Add
from the Action list.
3.
Enter the name of a time range.
4.
Click
Apply
.
FIG. 268
Showing Collected RMON Statistical Samples
Administration - Time Range Options
Add
Time-Range Name
Name of a time range. (Range: 1-32 characters)
Add Rule
Time-Range
Name of a time range.
Mode
• Absolute - Specifies a specific time or time range. Start/End specifies the hours, minutes,
month, day, and year at which to start or end.
• Periodic - Specifies a periodic interval.
Start/To specifies the days of the week, hours, and
minutes at which to start or end.
FIG. 269
Setting the Name of a Time Range