Basic Management Tasks
43
Instruction Manual - NXA-ENET8-POE+
7.
Enter the name of the file to download.
8.
Select a file on the switch to overwrite or specify a new file name.
9.
Click
Apply
.
If you replaced a file currently used for startup and want to start using the new file, reboot the system via the System > Reset
menu.
Saving the Running Configuration to a Local File
Use the System > File (Copy) page to save the current configuration settings to a local file on the switch. The configuration
settings are not automatically saved by the system for subsequent use when the switch is rebooted. You must save these settings
to the current startup file, or to another file which can be subsequently set as the startup file.
The following table displays the options on this page:
NOTE:
The maximum number of user-defined configuration files is limited only by available flash memory space.
Perform these steps to save the running configuration file:
1.
Click
System
>
File
.
2.
Select
Copy
from the Action list.
3.
Select
Running-Config
from the Copy Type list.
4.
Select the current startup file on the switch to overwrite or specify a new file name.
5.
Click
Apply
.
If you replaced a file currently used for startup and want to start using the new file, reboot the system via the System > Reset
menu.
FIG. 27
Copy Firmware
System - File (Copy) Options
Copy Type
The firmware copy operation include the following option:
• Running-Config - Copies the current configuration settings to a local file on the switch.
Destination File Name
Copy to the currently designated startup file, or to a new file. The file name should not contain
slashes (\ or /), the leading letter of the file name should not be a period (.), and the maximum
length for file names is 32 characters. (Valid characters: A-Z, a-z, 0-9, ".", "-", "_").
FIG. 28
Saving the Running Configuration