Interface Configuration
65
Instruction Manual - NXA-ENET8-POE+
Perform these steps to show a list of port statistics:
1.
Click
Interface
>
Port
>
Statistics
.
2.
Select the statistics mode to display (Interface, Etherlike, RMON, or Utilization).
3.
Select a port from the drop-down list.
4.
Use the
Refresh
button to update the screen.
Perform these steps to show a chart of port statistics:
1.
Click
Interface
>
Port
>
Chart
.
2.
Select the statistics mode to display (Interface, Etherlike, RMON, or All).
65-127 Byte Packets
128-255 Byte Packets
256-511 Byte Packets
512-1023 Byte Packets
1024-1518 Byte Packets
1519-1536 Byte Packets
The total number of packets (including bad packets) received and transmitted where the number
of octets fall within the specified range (excluding framing bits but including FCS octets).
Utilization Statistics
Input Octets in kbits per second
Number of octets entering this interface in kbits/second.
Input Packets per second
Number of packets entering this interface per second.
Input Utilization
The input utilization rate for this interface.
Output Octets in kbits per second
Number of octets leaving this interface in kbits/second.
Output Packets per second
Number of packets leaving this interface per second.
Output Utilization
The output utilization rate for this interface.
FIG. 54
Showing Port Statistics (Table)
Port Statistics