manualshive.com logo in svg

AMX NXA-ENET8-POE+, Инструкция по эксплуатации, Страница: 243 / 283

Поделиться
Скачать
AMX NXA-ENET8-POE+ Скачать руководство пользователя страница 243

Multicast Filtering

243

 Instruction Manual - NXA-ENET8-POE+

Displaying Multicast Groups Discovered by IGMP Snooping

Use the Multicast > IGMP Snooping > Forwarding Entry page to display the forwarding entries learned through IGMP Snooping.

Command Usage

To display information about multicast groups, IGMP Snooping must first be enabled on the switch (see page 234).
The following table lists the options on this page:

To show multicast groups learned through IGMP snooping, click 

Multicast

 > 

IGMP Snooping

 > 

Forwarding Entry

.

Displaying IGMP Snooping Statistics

Use the Multicast > IGMP Snooping > Statistics pages to display IGMP snooping protocol-related statistics for the specified 

interface.
The following table lists the options on this page:

Multicast - IGMP Snooping (Forwarding Entry) Options

VLAN

An interface on the switch that is forwarding traffic to downstream ports for the specified multicast 

group address.

Group Address

IP multicast group address with subscribers directly attached or downstream from the switch, or a 

static multicast group assigned to this interface.

Interface

A downstream port or trunk that is receiving traffic for the specified multicast group. This field 

may include both dynamically and statically configured multicast router ports.

Up Time

Time that this multicast group has been known.

Expire

Time until this entry expires.

Count

The number of times this address has been learned by IGMP snooping.

FIG. 285  

Showing Multicast Groups Learned by IGMP Snooping

Multicast - IGMP Snooping (Statistics) Options

VLAN

VLAN identifier. (Range: 1-4094)

Port

Port identifier. (Range: 1-10/26/28/52)

Trunk

Trunk identifier. (Range: 1-8)

Query Statistics

Other Querier

IP address of remote querier on this interface

Other Querier Expire

Time after which remote querier is assumed to have expired.

Other Querier Uptime

Time remote querier has been up.

Self Querier

IP address of local querier on this interface.

Self Querier Expire

Time after which local querier is assumed to have expired.

Self Querier Uptime

Time local querier has been up.

General Query Received

The number of general queries received on this interface.

General Query Sent

The number of general queries sent from this interface.

Specific Query Received

The number of specific queries received on this interface.

Specific Query Sent

The number of specific queries sent from this interface.

Warn Rate Limit

The rate at which received query messages of the wrong version type cause the Vx warning count 

to increment. Note that "0 sec" means that the Vx warning count is incremented for each wrong 

message version received.

V1 Warning Count

The number of times the query version received (Version 1) does not match the version configured 

for this interface.

V2 Warning Count

The number of times the query version received (Version 2) does not match the version configured 

for this interface.

Содержание NXA-ENET8-POE+




























































































































































































































































































Отзывы:

Нет отзывов