7.
Select the panel’s Kit file from the
Files
section (FIG. 52).
8.
Enter the
Device
value associated with the panel and the
System
number associated with the Master
(
listed
in the OnLine Tree tab of the Workspace window
).
The Port field is greyed-out.
9.
Click the
Reboot Device
checkbox. This causes the touch panel to reboot after the firmware update
process is complete.
The reboot of the panel can take up 30 seconds after the firmware process has
finished.
10.
Click
Send
to begin the transfer. The file transfer progress is indicated on the bottom-right of the
dialog (FIG. 52).
11.
Click
Close
(
after the panel reboots
) to return to the main program.
12.
Right-click the associated System number and select
Refresh System
. This causes a refresh of all
project systems, establishes a new connection to the Master, and populates the System list with
devices on your particular system.
13.
Confirm the panel has been properly updated to the correct firmware version.
FIG. 52
Selected Firmware file
Description field for selected Kit file
Device and System values
must match the System and Device values
listed in the Workspace window
Firmware download
status
