AMX MAX-HT04, Руководство по эксплуатации/справочник

Страница: 13 / 56

MAX HT Servers - Setup and Configuration
7 MAX HT Servers
Connect a PS/2 mouse and keyboard, and a VGA monitor directly to the MAX Server to access the on-
board interface, called the
MAX Admin Menu (FIG. 5). You’ll use the options in the Admin Menu to
configure communication settings and add/remove MAX-AVP Audio/Video Players as well as MAX-
AVM and MAX-AOM modules.
Step 2: Connect the Power Cable(s) and Apply Power
1. Connect the power supply, using the supplied power cord.
2.
Flip the Master Power Supply switch to On.
3.
Push the Power On/Off pushbutton to apply power.
4.
Allow up to one minute for the server to boot-up.
Step 3: Access the MAX Admin Menu
Once the boot-up process is complete, the MAX Admin Menu (FIG. 5) is displayed:
The MAX Admin Menu allows access to various administrative functions for the MAX Server.
Working With the MAX Admin Menu
Use the arrow keys on the keyboard to highlight the desired option, and press Enter to make a
selection. Do not use the arrow keys on your keyboard’s numeric keypad.
Beyond this menu, press the TAB button to navigate through the elements on the pages until
an asterisk appears next to the desired selection.
Press the spacebar to make a selection (press again to de-select).
Alternatively, you can access the MAX Admin Menu via Telnet, using the Server
Configuration feature in the WInMAX software. This requires that the MAX Server is
configured with an IP address and Subnet Mask settings which are appropriate for
your network configuration. Refer to “Step 6: Install and Configure WinMAX Software”
for details.
Consider using a UPS with the MAX Server, modules and ethernet switch (if
applicable).
FIG. 5 MAX Admin Menu