AMX MAX-HT04, Руководство по эксплуатации/справочник

Страница: 45 / 56

Replacing HDDs in MAX Servers
39 MAX HT Servers
3.
Install and secure the replacement drive into the drive tray.
4.
Slide the replacement drive/tray assembly fully into the slot, and push the hinged latch back into its
locked position. The LEDs on the front of the HDD should light to indicate that it has been
connected and is communicating properly.
5.
Return the faceplate to its locked position.
Step 3: Add the New Drive to the System
When an HDD is replaced in an HT Server, it must be added to the system:
1.
In the Admin Menu, select Authenticate HDD .
2.
Select Add , then select OK to proceed to the Add HDD window.
3.
Enter the Serial Number for the new drive.
The Serial Number for each replacement drive is printed on a decal placed on the top panel of the
HDD.
When entering the Serial Number, use the following syntax (no quotes): “
WD-
WXXXXXXXXXXX ”
4.
Enter the 16-digit Key supplied by AMX for that HDD (printed on a slip of paper included with the
replacement drive).
5. Select Restart MAX Daemon (in the Admin Menu).
6.
Note : Restarting the MAX Daemon will disconnect WinMAX from the server.
7.
Terminate the Telnet session.
The HT Server will rebuild the new drive and add it to the RAID array. There is no need to reboot the
server; the new drive is ready to use.
MAX Admin Menu
Use the other options in the Authenticate HDD menu (accessible via the Admin Menu), to manage all
HDDs in the server, as shown in FIG. 40.
The options in the Authenticate HDD menu are described below:
Refer to the MAX Admin Menu section on page 13 for more information.
FIG. 40 Authenticate Menu - View HDD and Select HDD(s) to Remove dialogs
• Add: Select to authenticate a new HDD, as described in the previous section.
• View: Select to view all the serial numbers and keys for HDDs in the system. Note that this list only indi-
cates HDDs that have been successfully authenticated.
• Remove: Select to remove a selected HDD from the system. One or more drives can be removed at a time.