AMX MAX-HT04, Руководство по эксплуатации/справочник

Страница: 51 / 56

Rack Mounting MAX Servers
45 MAX HT Servers
Step 4: Mount the Adapter Bars to the Rack-Rail assemblies
1.
Use the included mounting hardware to attach an Adapter Bar to the front and rear of each of the
two Rack-Rail assemblies:
To ensure a proper fit, make sure that each Adapter Bar is mounted flush against all sides of the tabs
on the Rack-Rail assembly. When the Adapter Bar is seated properly against the tabs on the front of
the Rack-Rails, the bottom of the Adapter Bar should be flush with the bottom of the Rack-Rail
(FIG. 45).
2. Attach an Adapter Bar to the rear of each of the two Rack-Rail assemblies (FIG. 46). Once the
Adapter Bars have been attached to the front and rear of both Rack-Rail assemblies, the Rack-Rails
are ready to use.
FIG. 45
Adapter Bar mounted to the front of the Rack-Rail assembly
FIG. 46 Mount the Adapter Bars to the Rail assemblies
FRONT VIEW REAR VIEW
Use the outside and center holes to mount
The bottom of the Adapter Bar sits flush against the tabs on the Rack-Rail assembly
the Rack-Rail w/ Adapter Bars to
the equipment rack
Use these holes to mount the Adapter
Bar to the Rack-Rails
Adapter Bar
Mounting rails on equipment rack
Rail Assembly
Adapter Bar
(rear)
(front)