MAX HT Servers - Setup and Configuration
8
MAX HT Servers
Step 4: Add MAX-AVPs and AVM/AOM Modules to the
Server
Before you can use MAX-AVP Audio-Video Players MAX-AVM or MAX-AOM modules, they must
each first be added to the server, via the
Output Module Setup
options in the MAX Admin Menu. You
should add the modules/players to the server before making any physical connections.
Adding MAX-AVP Players and/or MAX-AVM Modules
Complete these steps for each MAX-AVM Audio-Video module and/or MAX-AVP Audio-Video Player
that you want to add to the MAX-HT:
1.
In the MAX Admin Menu, select:
Output Module Setup > Add Output Module > AVM
.
2.
In the
Enter Output Number
field, specify the output on the server that you want to assign to this
AVP or AVM (range = 1 - 33). Each AVP/AVM requires one output. Select
OK
to proceed.
Note
: The server will not allow you to assign a module to an output/zone that is already in use.
Select
Output Module Setup > View
to review the current output/zone assignments.
3.
In the
Enter Serial Number
field, enter the
Setup Serial (Key) Number
. This number is printed on a
decal located on the bottom of each AVM/AVP enclosure. The system will notify you that the AVP
(or AVM) has been added to the system.
4.
Select
OK
to return to the Output Module Setup menu, select
OK
again to return to the main menu.
5.
Select
Restart MAX daemon
.
Adding MAX-AOM Audio-Only Modules
Complete these steps for each MAX-AOM module that you want to add to the HT:
1.
In the MAX Admin Menu, select
Output Module Setup > Add Output Module > AOM
.
2.
In the
Enter Output Number
field, specify the first of up to 4 outputs on the server that you want to
assign to this AOM (range = 1 - 33).
Each AOM requires up to 4 server outputs to accommodate the 4 audio output/zones provided by
each AOM. Since the MAX-HT12 supports two AOMs (one on each USB port), you can assign up
to 8 server outputs. Select
OK
.
3.
In the
Enter USB Port Number
field, enter the number of the USB port (
1
or
2
) on the server that this
MAX-AOM will be physically connected to. Select
OK
.
4.
In the
Enter AOM Output Number
field, specify which audio output/zone on the MAX-AOM (1-4)
you are adding to the specified server output. Select
OK
.
5.
A message is displayed to notify you that the AOM module has been added to the system. Select
OK
to return to the Output Module Setup menu.
Repeat these steps to assign each of the AOM’s four audio output/zones to a USB port and Output
number on the server.
For detailed descriptions of all options in the MAX Admin Menu, refer to the MAX
Admin Menu
section on page 13
.
HT Servers treat MAX-AVPs exactly the same as MAX-AVMs, and the process of
adding them is identical.
MAX-AVMs use a Setup “Serial” Number; MAX-AVPs use a Setup “Key” Number.
Содержание MAX-HT04
