AMX MAX-HT04, Руководство по эксплуатации/справочник

Страница: 24 / 56

MAX Admin Menu
18 MAX HT Servers
Adding New Modules to the System
1. Select Add , then select the type of module ( MAX - AOM or MAX - AVM ) you are adding (FIG. 12).
2.
Click OK to proceed. Next you must enter an Output Number for the new module (FIG. 13).
MAX-HT04 and -HT12 Home Theater servers support up to two AOM modules, so the output
can be either 1 or 2 . If you are only using one AOM with these servers, the output should be
set to 1 .
If you are adding a MAX-AVM audio-video module, the range is 1-25.
If you are adding a MAX-AVP Audio-Video Player, the range is 1-25 (MAX-HT04 and
MAX-HT12 servers support up to a total of 25 AVMs and/or AVPs).
Click OK to save your changes.
Viewing all Modules in the System
Select View in the Output Module Setup page (FIG. 11 on page 17) to open a read-only list of all
modules currently detected by the server to be installed in the system (FIG. 14).
MAX-HT Home Theater Servers treat MAX-AVP Audio-Video Players exactly the
same as MAX-AVP modules, and the process of adding AVPs is the same as that for
AVPs.
FIG. 12 Add Output Module
If you are adding a MAX-AVP, select AVM from the Add Output Module menu.
FIG. 13 Add Output Module (
AOM and AVM)
FIG. 14 Installed Output Modules