Device Configuration Software
60
Novara 3000 Series ControlPads Instruction Manual
Perform these steps to use the Test Command Tool:
1.
Open the Device Library Manager.
2.
Select a device, then select a command for the device.
3.
Click
Test Command
. The Test Command Tool opens.
4.
Select the COM port on the PC which is connected to the device to which you want to send the test command.
5.
Click
Send Command Data
to transmit the command data to the device. Any information returned from the device
appears in the Feedback area.
Updating Firmware
AMX DCS software provides a simple interface for updating your 3000-Series ControlPads with the latest available
version of firmware. You must use a Novara CP3000 Firmware Data File (.out) to upgrade the firmware through AMX
DCS software. The latest firmware files can be found at the Tech Center at
www.amx.com
. Perform these steps to update
the firmware on your ControlPad:
1.
Open the Device Configuration & Layout Inspector window (see page 27).
2.
Tag any devices that need a firmware upgrade in the Device Layout. You can tag as many devices as needed. You
cannot tag any devices in the Devices Found on Network list. If you want to upgrade the firmware of an unbound
device, you must first add it to the Device Layout.
3.
On the AMX DCS window, click
Firmware Upgrade
.
4.
Select a firmware file (.out) from the dialog that appears, and click
OK
. The
Programming Device(s) Monitor
dialog appears (FIG. 81).
All firmware updates are programmed in parallel. The options at the bottom of the dialog are disabled until the
updates are complete. A confirmation box appears if all updates are successful. If any updates fail, click
Re-
Program Unsuccessful
to attempt the upgrade again.
If you are updating to firmware version 1.2 or higher and the current device uses a version lower than 1.2, the
firmware update is split into two processes. The first process updates the firmware, and the second process updates
the web page files. Follow the on-screen instructions to complete the second process.
Test Command Tool Options (Cont.)
Feedback
This area displays any feedback received from the receiving device.
Close
Click to close the window.
FIG. 81
Programming Device(s) Monitor dialog
Содержание CP-3006
Страница 6: ...iv Novara 3000 Series ControlPads Instruction Manual Table of Contents ...
Страница 30: ...Button Labeling 24 Novara 3000 Series ControlPads Instruction Manual ...
Страница 68: ...Device Configuration Software 62 Novara 3000 Series ControlPads Instruction Manual ...
Страница 75: ...RMS Configuration 69 Novara 3000 Series ControlPads Instruction Manual ...