AMX CP-3006, Инструкция по эксплуатации, Страница: 42 / 76

Device Configuration Software
36 Novara 3000 Series ControlPads Instruction Manual
Setup
Setup contains five options for your ControlPad: Button Backlight, Button Behavior, Button Groups, Volume Control,
and Interrogation. Click the plus sign (+) beside Setup to expand or collapse the available options.
Button Backlight
The Button Backlight option enables you to set the backlight color and level for each button on the keypad. Select a
button on the graphical representation of the keypad then select Button Setup to change the button backlight properties.
You cannot add this option to a script. It is a global setting and is set when the ControlPad starts up. Once you select the
color you want, you can program it by clicking the Program Devices button.
The following table lists the Button Backlight options:
Perform these steps to set the backlight color of a button:
1.
In the AMX DCS window, click the plus sign (+) beside Setup in the Content area. A list of setup options appear.
2. Click Button Backlight . The Button Backlight options appear (FIG. 44).
3.
If you want the backlight settings to affect all buttons, click the Apply All Buttons check box.
4. Select the button color from the Backlight Color options menu.
5.
Use the Backlight Level slider to set the backlight level for the button.
6. In the Scripting area, click Program Devices . The backlight color is sent to the ControlPad.
FIG. 44 Button Backlight options
If you attempt to program a button’s backlight color with an empty script, the
ControlPad does not reflect the change. You must program at least one line of a
script for the color change to take effect.
Button Backlight Options
Apply All Buttons Check this box to apply the backlight color, level, and default RGB values to all buttons on the keypad.
If checked, the RGB Value section is disabled. If unchecked, the RGB Value section is enabled. A
warning appears if you choose to check this option.
Backlight Color Select a button color from the menu. Default RGB Values appear in the RGB section on the right
based on selected color.
Backlight Level Use the slider to set the backlight level of the button between 1 and 255. You can also use your pointer
to select the text in the field beside the slider and manually enter the backlight level for the button.
Note: You cannot turn off the backlight level by setting the level to 0.
RGB Value for
Selected Button This section holds the RGB values for the Backlight color selected. You can create a custom RGB by
modifying the colors shown in this section. The Save RGB button activates if you make any RGB color
changes.
Save RGB Saves your custom backlight color. This button only becomes active after you make an RGB color
change.
Default RGB Restores the backlight color to its default state.
Due to the nature of RGB LEDs, you may discover that certain color and brightness
settings, when applied across all buttons on a ControlPad, have minor variations in
color. If this is noticeable, the recommended solution is to adjust the color on buttons
individually until the colors match across all buttons.