AMX AXM-MCA, Инструкция по эксплуатации

Страница: 113 / 154

Color Active-Matrix LCD Mini-Touch Panels Mini-Touch Panel Program Reference 105
THE NUMBER OF AVAILABLE
MEMORY BLOCKS 3198
TOUCH SCREEN TO CONTINUE
Press the screen again to open the memory blocks used message box shown in
Figure 158. This message shows the number of used memory blocks.
THE NUMBER OF MEMORY BLOCKS
USED BY USER 88
TOUCH SCREEN TO CONTINUE
Send file
Press the SEND FILE option to open the decision box shown in Figure 159. You can
send files to a PC using the AXlink or 4-pin header on the UniMount or rack-mount
mini-touch panels. The target PC must be running the TPDOC or TPDesign software
program before you send the mini-touch panel drawings. Refer to TPDOC or
TPDesign instruction manuals for more information.
YES NO
DO YOU WANT TO SEND
THE DRAWING LAYOUT
FILE WITH THE SYSTEM ?
•
YES Sends the drawing file to the PC and opens the decision box in
Figure 160.
•
NO Cancels the drawing file transfer and opens the decision box in
Figure 160.
YES NO
PRESS YES FOR BUS
TRANSFER. PRESS NO
FOR RS232 (9 PIN D).
Figure 157
memory blocks message
Figure 158
Used memory blocks message
Note
The send file step is not
required if the mini-touch panel
is connected directly to the
AXCESS Control System.
Figure 159
Drawing layout decision box
Figure 160
Transfer type decision box