AMX AXM-MCA, Инструкция по эксплуатации

Страница: 114 / 154

106 Mini-Touch Panel Program Reference Color Active-Matrix LCD Mini-Touch Panels
•
YES Sends the file to the PC over the AXlink connector on the mini-touch
panel, and opens the decision box in Figure 161.
•
NO Not functional for this operation.
YES NO
PRESS YES TO START
THE UPLOAD AND NO TO
QUIT.
•
YES Sends the mini-touch panel files to the PC. During the upload process,
you can press the EXIT button to cancel the file transfer and return to the
current page.
•
NO Cancels the file transfer and returns to the current page.
Receive file
Press the RECEIVE FILE option to open the decision box in Figure 162.
YES NO
PRESS YES FOR BUS
TRANSFER. PRESS NO
FOR RS232 (9 PIN D).
You can receive files from a PC using the AXlink connector on the mini-touch panel.
The PC must be running the TPDOC or TPDesign software program before you can
send mini-touch panel drawings. Refer to TPDOC or TPDesign instruction manuals
for more information. Use the SAVE option if you want to save a file stored in the
mini-touch panel.
•
YES Receives the PC file via the AXlink connector on the mini-touch panel
and opens the decision box in Figure 163.
•
NO Not functional for this operation.
YES NO
THIS WILL DESTROY
SOME PANEL DATA.PRESS
YES TO CONTINUE.
Figure 161
Start the transfer decision box
Note
The PC must be running
TPDOC or TPDesign before
you can send a mini-touch
panel file.
Note
The receive file step is not
required if the mini-touch panel
is connected directly to the
AXCESS Control System.
Figure 162
Transfer type decision box
Caution
All files stored in the mini-touch
panel before the transfer will be
erased and cannot be restored.
The mini-touch panel will not
erase stored drawings or
symbols.
Figure 163
Continue decision box