SOLAR PUMP KIT USER’S MANUAL
Design for fountain
Model No. SolarFree 800C Supreme
1. OVERVIEW
1) The solar pump is designed for outdoor or indoor fountain use, and is powered by a solar module.
In order to
make the pump work by solar energy, the solar module needs to be placed in the sunlight facing the sun.
2) The pump is supplied by the battery station which is charged by a solar module. It can work for day and night.
3) The special LED ring light can lighten the fountain in the night.
4) The performance of the pump depends on the sunlight intensity and the orientation of the solar module.
2. COMPONENTS
1)solar panel 2)solar pump 3)solar battery backup 4)fountain LED light 5) nozzle accessories
3. ASSEMBLING
1) Unpack all components carefully.
2) Connect the pump to the solar battery backup.
3) Connect the solar battery station to the solar panel.
4) Connect the nozzle with the pump tube, the nozzle can produce 2 different jet shapes like the above picture.
5) Connect the LED light to the socket like below photos, it can easily slip onto the nozzle tube or put it on the
ground under water only.
6) Make sure to place the pump fully underwater when the pump operates.
7) To produce the excellent fountain effect, please leave the fountain head above the water surface.
8) Put on the ON/OFF switch, the green indicating light “ON” shows the system is in NORMAL condition, the
solar pump is now ready to operate.
9) Adjust the regulator switch to get different pump performance. The pump can operate at the voltage range of
12V-24V.
4. CAUTIONS
1) Do not alter or change the components of the product.
2) Do not connect the pump to any AC voltage power directly; it’s ONLY for DC Voltage power.
3) Operate the pump in freshwater or saltwater only (never above 40
℃
), especially keep it away from flammable
liquids.
4) Do not strike the solar panel.
5) Do not let the pump run dry.
5. CLEANING AND MAINTENANCE
If after some time the pump starts losing power or stops working, please clean up sediment in the pump shell or
filter cribs. Note the pump can be opened by pressing down at the bottom of the filter housing (See the above
