Product Overview and Specifications
24
Hardware Reference Manual – DXLink™ Twisted Pair Transmitters/Receiver
NOTE:
A list of HID devices which have been tested and found to be working well with the latest firmware is available (see “DXLink -
HID supported Devices” on the DXLink Receiver’s product page at www.amx.com).
* Only supported when the DX-RX scaler is in Bypass mode using CEA-861 formats and the resolution is 1080p,60 or less.
NOTE:
Interlaced and progressive video are supported into the Transmitter; progressive is only supported out of the Receiver unless in
non-scaling Bypass mode
NetLinx and Control Specifications
Parameter
Value
ICS LAN / Ethernet Port
(Modules Only)
• TCP/IP port (ICS LAN 10/100)
• RJ-45
Serial (Modules Only)
• Bidirectional RS-232
• Standard NetLinx baud rate 1200 to 115K
• Parity support: Odd/Even/None
• 3.5 mm pluggable Phoenix terminal block
IR Control (Modules Only)
• Port for use with IR03 Receiver (optional accessory FG-IR03)
• Port for use with CC-NIRC Emitter (optional accessory FG10-000-11)
Advanced Configuration Interface
USB mini-B connector (Program port)
ID Pushbutton
• Toggle between DHCP and static IP addressing
• Places system in NetLinx Device ID assignment mode
• Reset the factory default settings
• Restore the factory firmware image
USB (HID) Keyboard and Mouse Specifications
Parameter
Value
USB (HID) DX-TX
• (1) USB Type B connector (“Host”)
• Connect a DXLink Twisted Pair TX to a PC and emulate keyboard and mouse commands from
a DXLink Twisted Pair Receiver or a DXLink Fiber Receiver
USB (HID) Wallplate TX and
Decor Wallplate TX
• DX-TX-WP: (1) USB Mini-B (“Host”); DX-TX-DWP: (1) USB Mini-AB (“Host”)
• Connect a DXLink Twisted Pair Decor Transmitter to a PC and emulate keyboard and mouse
commands from a DXLink Twisted Pair Receiver or a DXLink Fiber Receiver
USB (HID) DX-RX
• (1) USB Type A connector (“Device”)
• Connect a keyboard and mouse and send commands to a PC connected to a DXLink Twisted Pair
Transmitter or a DXLink Fiber Transmitter
HDMI Specifications
Parameter
Value
Compatible Formats
HDMI, HDCP, DVI (DVI requires conversion cable)
Signal Type Support
HDMI, DVI-D (Single Link with a DVI-to-HDMI cable adapter), Disp+
(input only with HDMI cable adapter)
Video Data Rate (max.)
4.95 Gbps / 6.75 Gbps*
Video Pixel Clock (max.)
165 MHz / 225 MHz*
Progressive Resolution Support
480p up to 1920x1200,60Hz (including but not limited to those resolutions listed on page 111
and page 114)
Interlaced Resolution Support
480i, 576i, 1080i
(including but not limited to those resolutions listed on page 111 and page 114)
Deep Color Support
24 bit, 30 bit*, 36 bit*
Color Space Support
RGB 4:4:4
YCbCr^^ 4:4:4 and 4:2:2
• Input signal support for YCbCr 4:4:4 and 4:2:2; output color-space is converted to RGB 4:4:4.
3D Format Support
Yes (HDMI Primary Formats)
• Frame Packing 1080p up to 24 Hz
• Frame Packing 720p up to 50/60 Hz
• Frame Packing 1080i up to 50/60 Hz
• Top-Bottom 1080p up to 24 Hz
• Top-Bottom 720p up to 50/60 Hz
• Side-by-Side Half 1080i up to 50/60 Hz
NOTE:
Scaler on the corresponding output board or DX-RX must be set to Bypass mode.
Audio Format Support
Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH L-PCM, 6 CH L-PCM, 8 CH L-PCM
• Dolby Digital and DTS support up to 48 kHz, 5.1 channels.
dio Format
pport
