Product Overview and Specifications
23
Hardware Reference Manual – DXLink™ Twisted Pair Transmitters/Receiver
COMPATIBILITY NOTE:
DXLink Transmitters and Receivers are compatible with other DXLink products (see the Compatible AMX
Products listed in the table above). The Wallplate TX and the Decor Wallplate TX require an approved DXLink power injector (see table
above) when connecting directly to an DX-RX (Transmitters require firmware v1.2.40 or later; Receivers require firmware v1.0.80 or
later). AMX does not support the use of power supplies other than the one provided or power injectors other than those listed as they
may potentially damage DXLink equipment.
Decor Wallplate TX -Dimensions
Depth
Width
Height
2.25 in. (5.72 cm)
3.48 in. (8.84 cm)
4.06 in. (10.31 cm)
Decor Wallplate TX - Weight
Approximately 0.75 lb. (0.34 kg)
Decor Wallplate TX - Shipping Weight Approximately 1.35 lb. (0.61 kg)
Decor Wallplate TX - Mounting
Decor Wallplate TX mounts in standard double-gang US back box
MTBF
381,000 hours
Transport Layer Throughput
10.2 Gbps
Twisted Pair Cable Type
Shielded Cat6, Cat6A, Cat7*
Twisted Pair Cable Length
Up to 328 ft. (100 m)*
IMPORTANT:
DXLink twisted pair cable runs for DXLink equipment shall only be run within a
common building. “Common building” is defined as: Where the walls of the structure(s) are
physically connected and the structure(s) share a single ground reference.
* For more details and helpful cabling information, reference the white paper titled “Cabling for
Success with DXLink” available at www.amx.com or contact your AMX representative.
Modules - Airflow
Convection (openings on top of case)
Transmitters and Receiver
Inter-compatibility
All DXLink Transmitters can connect directly to the DXLink DX-RX. The Wallplate TX and Decor
Wallplate TX require either PDXL-2 (FG1090-170) or PS-POE-AT-TC (FG423-84) to do so.
Other AMX Equipment
AMX Products Compatible with
All DXLink Transmitters
• DX-RX
• Enova DGX Digital Media Switchers
• Enova DVX-3156HD
• Enova DVX-3155HD
• Enova DVX-2155HD
AMX Products Compatible with
DXLink Receiver
• DX-TX
• HDMI TX
• Wallplate TX
• Decor Wallplate TX
• Enova DGX Digital Media Switchers
• Enova DVX-3156HD
• Enova DVX-3155HD
• Enova DVX-3150HD
• Enova DVX-2155HD
• Enova DVX-2150HD
• Solecis SDX-410-DX
• Solecis SDX-510M-DX
• Solecis SDX-810-DX
Included Accessories
Desktop power supply (ENERGY STAR
®
qualified): 1 per module
IMPORTANT:
Only the provided desktop power supply should be used, and it must not be
altered in any way.
Compatible / Optional Equipment
• CC-NIRC NetLinx Emitter Cable (FG10-000-11)
• IR03 External IR Receiver Module (FG-IR03)
• PDXL-2 (FG1090-170)
• PS-POE-AT-TC (FG423-84)
• CC-USB, USB programming cable (FG10-5965)
(for use with DXLink Twisted Pair Transmitters only)
General Specifications (continued)
Twisted pair Cable
Specs
