![background image](http://html.mh-extra.com/html/amx/acv-2100-acendo-vibe/acv-2100-acendo-vibe_instruction-manual_2937668038.webp)
Serial Commands
38
Acendo Vibe Conferencing Soundbars - User Guide
Events
Acendo Vibe will send event messages when asynchronous events, i.e. occurrences not related to a received command,
happen.
Note that the Acendo Vibe supports the Command Protocol on both its USB and RS-232 interfaces. However, events are
only reported on the RS-232 interface.
The table below shows the possible events to be reported with the EVENT message:
Event <Event Name> <Event Data>
Event Name
Event Data
Description
boot_complete
Booting complete
bt_conn
Bluetooth connected
bt_dis
Bluetooth disconnected
bt_remote_conn
Remote control connected
bt_ remote_dis
Remote control disconnected
bt_inactive
Bluetooth audio inactive for 30 minutes
bt_oor
Bluetooth out-of-range for 5 minutes
hdmi_conn
Connection on external HDMI input
hdmi_dis
Disconnection on external HDMI input
mic_mute
Microphone muted
mic_unmute
Microphone unmuted
occupancy_det
Occupancy detected
spkr_mute
Speakers muted
spkr_unmute
Speakers unmuted
src_change_audio
<setting> = “aux”, “bluetooth", “hdmi”, “optical” or “usb”
Audio source changed
usb_conn
Connection on external USB
usb_dis
Disconnect on external USB
vacancy_det
No occupancy detected for N seconds
vol_change
<level> = 0..100
Volume changed