Quick Start
7
4. Esc/Cab’s Name:
When on the home screen press to see currently chosen Impulse
Response’s filename. Otherwise press to return to the upper level menu or to the home
screen.
5. Edit:
Press to edit the preset or the effect block.
6. Multi-function Buttons:
When on the home screen press:
•
1/ATT IN
to adjust attenuator settings
•
2/VOL
to adjust output levels
•
3/EQ
to access the Master EQ
•
4/SYS
to get to the system menu
•
5/TUNER
to activate the tuner. You can also assign this function to a footswitch
When on the preset screen press:
•
1/ATT IN
to reset the preset to factory default settings
•
2/VOL
to adjust output level for the current preset
•
3/EQ
to manage controllers for the current preset
•
4/SYS
to rename the preset
•
5/TUNER
to copy currently selected effect block to another preset
7. FX LED:
This lights when the effects are activated.
8. Tap LED:
Shows you the time and speed of delay and modulation effects.
9. In Clip:
Turns green when the sound comes into Pangaea. Turns orange when input level
is too high. Try reducing the output level of the device connected to Pangaea’s input.
Otherwise some unpleasant distortion may occur.
10. Out Clip:
Everything is fine when it is green. Which means Pangaea produces some
sound. It is orange when clipping is detected. Try reducing preset or master volume to avoid
distortion.
