Editing Presets
15
Copying Effect Blocks
You can copy effect’s settings between presets.
To do that select the effect block you want to
copy at the Preset screen and press
5/TUNER
.
You’ll be prompted to choose the destination
preset. Select it by turning and confirm by
pressing the
Navigation/Confirm
knob. You’ll see the confirmation message.
Assigning Controllers
Each preset may be assigned up to 16
controllers. To manage preset controllers, press
3/EQ
on the Preset screen. All edits are done
using the
Navigation/Confirm
knob.
Here controllers are seen as connections
between sources (like footswitches, expression
pedal, etc.) and destinations which are various
parameters inside of effect blocks. You can
assign multiple controllers to control the same
parameter. As well as you can control multiple parameters using the same
Source
.
Source
may be set to one of the following:
•
Off:
None
•
Expression:
External expression pedal
•
FSW DOWN:
Pangaea’s left footswitch labeled DOWN
•
FSW CONFIRM:
Pangaea’s middle footswitch labeled CONFIRM
•
FSW UP:
Pangaea’s right footswitch labeled UP
•
CC# 0-127:
any MIDI controller from 0 to 127
Other than turning effect blocks on or off and adjusting preset volume, additional following
parameters of corresponding blocks are available as destinations:
Preset
Name
Copy to ->
02
Contr 1
Source Off
Destin Preamp On Off
MinVal 0
MaxVal 127
PC OUT MIDI IN
SET 1
CC
