Controllers
36
As opposite to digital MIDI foot controllers, regular expression pedals are analog devices and
may need calibration to work properly. If you have a feeling that your pedal doesn’t cover the
full range of values, follow this procedure to calibrate your pedal:
• Select
Calibrate
and enter calibration mode by pressing
Navigation/Confirm
knob.
•
When prompted, set your pedal into the extreme minimum position (heel down) and
press
Confirm
knob.
•
Now set the pedal into extreme maximum position (heel up) and confirm again. You’re
good to go!
External MIDI Controller
If you decide to use an
External MIDI Controller
, for example AMT FS-2MIDI, connect
its output to Pangaea’s
MIDI In
. Make sure your external controller and Pangaea use the
same MIDI channel, you may want to check Chapter
“MIDI Channel”
for details.
Pangaea will react on incoming Program Change and CC (continuous controller) messages.
Program Change messages will recall Pangaea’s presets according to MIDI Map. You
can change the default order, see Chapter
“MIDI Mapping”
to find out how. As it was
described in Chapter
“Assigning Controllers”
, every preset has individual
PC Out
settings for outgoing Program Change messages. As for CC, all incoming messages will be
forwarded to
MIDI Out
“as is”, at the same time triggering controllers you have assigned for
effect blocks parameters in presets.
You can use an
External MIDI Controller
to enable/disable the
Tuner
. Press
4/SYS
button while on the Home screen to enter the system menu. Then turn the
Navigation/
Confirm
knob to move the cursor down and select
Tuner contr
item. Turn it on and press
Edit
to enter the submenu. Inside you can set the number of MIDI controller to control the
Tuner
.
