Getting Around
12
Getting Around
Home Screen
1. Preset Name:
The name of the currently selected preset.
2. Preset Number:
Currently selected preset number. Blank number means the preset is
empty. All effect blocks of an empty preset are disabled. Filled number means the preset was
modified and saved. Blinking number means the preset is selected but is not recalled. Press
Navigation/Confirm
knob to recall it.
3. Footswitch status:
If any of three footswitches has been assigned the controller function,
the corresponding square appears at the Home screen. Blank square means the footswitch is
inactive/depressed. Filled square means the footswitch is active/pressed. Like if you assign a
footswitch to turn an effect block on or off, this will show you whether or not the effect is
enabled.
Turn
Navigation/Confirm
to scroll through presets and press it to recall the selected
preset. If you’re lost and need to return to the Home screen, press
Esc
repeatedly until you
get there.
Press
Esc
while on the Home screen to see currently chosen Impulse Response’s filename.
Preset Screen
Let’s say you’ve selected a preset and want to edit it. Press
Edit
to get to the Preset screen.
You’ll see the following:
Preset
Name
1
2
3
RF GT CM
PA
IR
EQ
PR
DL PH FL
ER RV TR
CH
