- 24 -
Z5
DT
User’s Guide
Appendix 3 print and paper out position
Figure appendix 3-1
Caution:
To take marked label/paper for example, the figure above explains the print and paper out position;
Discontinuous label/paper locates by the front edge of the mark;
Refer to
rint and label/paper out position.
Appendix 4 communication interface
Appendix 4.1 serial interface
1)
Interface signal
Pin Signal name Signal direction
Function
1
None
2
RXD
Input
Data input
3
TXD
Output
Data output
4
DTR
Output
Data terminal ready
5
SG
-
Signal ground
6
DSR
Input
Data device ready
7
RTS
Output
Request transmission
8
CTS
Input
Allow transmission
9
FG
-
Frame ground
Table appendix 4.1-1 printer signal and status
2)
Wiring diagram
PC
Printer
TXD
RXD
RXD
TXD
CTS
RTS
RTS
CTS
SG
SG
Caution:
The following connection method can be used, which only needs 3 wires. This method applies to small
data amount or XON/XOFF flow control:
PC
Printer
TXD
RXD
RXD
TXD
SG
SG