AMT Datasouth Fastmark Z5DT Series Скачать руководство пользователя страница 13

Страница: 13 / 31

- 8 -

User’s Guide

3 Printer operations

3.1 LED, buzzer, feed button and LCD

3.1.1

LED functions

LED name

Status

Explanation

Work LED (green)

Always on

Printer is idle or working.

Flash twice

Prompt that the menu or parameter selection becomes effective.

See 3.2.2 Daily operations for details.

Pause LED (orange)

Always on

Printer is in pause status.

Error LED (red)

Flash

An error occurs. See 5.1 Troubleshooting for details.

3.1.2

Button functions

Button

Function

Explanation

Short press

Feed

In standby status, press the button for a short time to feed label/paper.

Pause

During the printing, press the button for a short time to enter pause status.

Continue

After the printer enters pause status, press the button for a short time to resume

the printing.

Menu switching

After entering the menu, press the button for a short time to switch the menu.

Parameter selection

After entering the submenu, press the button for a short time to select the

parameter.

Long press

Enter the menu

When the printer is idle, press the button for a long time to enter the menu.

Menu selection

After entering the menu, press the button for a long time to select the current

menu.

Parameter confirmation

When setting the parameter, press the button for a long time to validate the

current parameter.

Note:

Short press means the duration from pressing down the button to the time when the button uplifts is less than

0.5s. Long press means the duration of pressing down the button is more than 1s.

3.1.3

Buzzer functions

The buzzer beeps for a short time when the printer is turned on or reset;

The buzzer beeps many times when an exception occurs. For the details, please refer to 5.1

Troubleshooting.

3.1.4

LCD functions

LCD is used to display the printer status and menu and configure the printer parameters by cooperating with

the button.

3.2 Printer status and operation

3.2.1

Printer status

The printer has five statuses: idle, working, pause, configuration, and abnormal. Refer to next page.

Содержание Fastmark Z5DT Series
































Результаты поиска

Содержание Fastmark Z5DT Series

Отзывы:

Похожие инструкции для Fastmark Z5DT Series

Бренды по названию

Популярные бренды

AMT Datasouth Fastmark Z5DT Series, Руководство пользователя

Результаты поиска

Содержание Fastmark Z5DT Series

Отзывы:

Похожие инструкции для Fastmark Z5DT Series

Бренды по названию

Популярные бренды