- 11 -
Z5
DT
User’s Guide
1.BAUDRATE
115200
Figure 3.3.1-4 submenu of serial baud rate
4)
Repeat step 1-3 to change other parameters of the serial port.
5)
Save the modified parameters. Switch the menu to “SAVE ALL” option and press the button for a long time
to save the modified parameters. The printer will restart automatically after the saving to validate the
parameter changes. (Remarks: if “SAVE ALL” option is not executed, the printer will not save the setting and
will execute the previous configuration parameters when powered on next time).
6)
If you want to discard your changes, choose “EXIT” directly to exit.
Configuring other parameters is similar to the process described above, which can be operated according
to the menu prompts.
3.3.2
Detailed parameter setting range
Adjustment object
Setting range
Remarks
Media type
CONTINUOUS
MARK
WEB
CONTINUOUS: continuous label/paper
MARK: marked label/paper
WEB: label paper, please see Appendix 1.2
technical specifications of paper for details.
Media out mode
REWIND
TEAR OFF
PEEL OFF
CUTTER
The peel off module and cutter are optional.
Print darkness
00
—30
Set the print darkness as low as possible on
condition that the print effect is acceptable so as
to ensure the lifetime of print head.
Print speed (unit: IPS)
3-6
Vertical position adjustment (unit:
dots)
-120-+120
For adjustment effect, please refer to 3.5 Print
position adjustment.
Horizontal position adjustment
(unit: dots)
-9999-+9999
Tear-off position adjustment (unit:
dots)
-120-+120
Time
00-23
Supported display format
：
MM/DD/YY 24HR
MM/DD/YY 12HR
DD/MM/YY 24HR
DD/MM/YY 12HR
00-59
Date
00-99
01-12
01-31
