AMS TOUCHLESS, Руководство по эксплуатации и обслуживанию

Страница: 31 / 50

L0192A
25
9. Card Refund
This setting must be maintained at he factory default of “
Y
” for
yes . With this setting, the vendor will refund credit from a failed
vend back to the Insight device .
Special MDB-Related Operation
MDB Out-of-Service:
The VMC will go out-of-service if it determines that the cashless
system, the Vagabond Insight Module has become non-
responsive.
OPTIONS
1. Message
Since the VMC’s Display is never available for a user to view,
this feature is probably unnecessary. However, this feature
could be used if the operator wanted to display a special
reminder for a route person or Service Technician when they
opened the machine.
The scrolling message that is displayed when the vendor is idle.
The factory default message is ‘GUARANTEED DELIVERY’, but
tis message can be changed if desired.
When changing the message It is best to write out the desired
message first. The message to be displayed on the scrolling
display can be up to 50 characters, including letters, numbers,
punctuation and spaces. New messages erase old ones.
Select the message option and the controller will prompt the user
to press “1” to change the message, or press “#” to exit.
To enter a message, the user should rapidly tap a particular key
to cycle through a list of characters for that key. Stop at the
desired character. When the keypad is left idle, the last-displayed
character is moved over to the end of the message. Continue to
select the next character. The key definitions are similar to those
of cell phones:
KEY 0:
(space)0
KEY 5:
JKL5
KEY 1:
!?,.$:;*&”+-/<>=#% ‟ 1
KEY 6:
MNO6
KEY 2:
ABC2
KEY 7:
PQRS7
KEY 3:
DEF3
KEY 8:
TUV8
KEY 4:
GHI4
KEY 9:
WXYZ9
Pressing the * key will back space through the message.
Pressing the # key will save the message.
2. Prize
The factory default is “
0
” for none. The user can set the vendor to
give away a free product after a predetermined number of
successful vends.
Enter the number of vends between free vends, up to 9999 and
press * to Save, or press # to abort without saving. Setting the
number to “0” will disable the prize option.
3. Language
You will be prompted at Entry with:
1- Primary (
In the current Primary language
)
The user is presented with a menu of available languages. The
user may choose the primary language for the display of all
messages. Note that Service Mode messages are available in
Primary language only.
2 - Secondary
If desired, the user can select a secondary language for the
display of all messages. The list is the same as the list of Primary
languages, but also includes the Option of ‘0’ which means that
there will be no secondary language shown.
Messages will be displayed first in the primary language, then in
the secondary language. The default setting is English for both
the primary and secondary language
4. Speech
A speech synthesizer option is available for use with RC
Systems Inc. DoubleTalk LT speech synthesizer. It operates only
while the vendor is in service mode. The speech synthesizer
vocalizes keystrokes and what is shown on the display.
The Options menu selection 5 enters the synthesizer on/off
menu. Press 5 to toggle on/off. Press # to exit to the Options
Menu.
When turned on the synthesizer is inactive until the vendor is
placed into service mode. The synthesizer must be plugged into
the DEX plug on the control board. A utility cable (AMS P/N
20786, Harness, Chip Programming) may be used, but it must be
plugged into a male-to-male gender adapter (Radio Shack 26-
231B) followed by a null modem adapter (Radio Shack 26-264).
The serial cable from the DoubleTalk LT is plugged into the null
modem adapter. The ¼” jack from the utility cable is then
plugged into the DEX plug on the control board (other DEX
functions cannot be used while the DoubleTalk LT is plugged in).
A dedicated cable could also be constructed.
5. Serial Number
– Field ID101 in the DEX data report is for the
machine’s Serial Number and can be used to identify the
different machines on your route. This field default is the Serial
Number of the Control Board itself.
This menu option allows you to program a Serial Number of your
choice up to 10 digits long
.
Enter the number you want to use – up to 10 Digits – and press *
to Save. If you make a mistake, simply press # to Exit the
process without saving.
When you press * to Save your new number, the Display will
briefly show “MACHINE SN SAVED” and then prompt you with
the question:
“USE FOR
CHANGER SN?”
“1 YES 2 NO”
If you choose YES, the number you just entered will be reported
in both the ID101 and the CA101 fields of your DEX reports.
Choose NO to retain the unique serial number of your coin mech
in CA101. (
Use NO unless you have a special reason for having
this special DEX reporting scheme.)
6 SERVICE PROGRAMMING