AMS TOUCHLESS, Руководство по эксплуатации и обслуживанию

Страница: 14 / 50

L0192A
8
c. Never place the vendor in a moving environment
such as on a ship without properly securing it in
place.
d. Never place the vendor in a location where it may
be struck by a vehicle.
e. Never transport an unsecured vendor, or a vendor
still containing product.
f. Never attempt to lift or move the vendor by hand.
Always use equipment with the proper load rating.
Note that the Specification weight listed is
empty
weight.
Figure 2.1 Tray Extension Warning Label
Other Improper Conditions
Hazardous conditions can be created by improper use or
service of the vendor.
a. Always reinstall any parts removed during service
to their original locations.
b. Never make unauthorized modifications to any
part of the vendor.
c. Always replace components that are worn, broken,
or otherwise unfit for use.
d. Never use unauthorized parts, or use parts for
anything other than their intended use.
To Safely Move a Machine
If you need to move your Vending Unit, you’ll want to use a
material handling device, such as a pallet jack, appliance dolly
or forklift to position it. Make certain that the door is shut and
secured.
To improve safety and to provide maximum protection for the
machine and levelling legs, it is recommended that you use the
supplied shipping boards whenever transporting the machine.
Ground Fault Circuit Interrupter
This merchandiser is equipped with a Ground Fault Circuit
Interrupter (GFCI), in compliance with UL 943, as required by
ANSI/UL 751.
TEST STANDARDS
AMS vending machines bearing the ETL mark have been tested
and comply with the following standards:
ANSI/UL and CSA Standards
This machine complies with the UL Standard for Safety for
Vending Machines ANSI/UL 751 and the Standard for
Vending Machines, Consumer and Commercial Products
(CAN/CSA C22.2 No. 128)
WARNING!
Do not use electrical appliances inside the
vendor unless recommended by AMS.
2 SAFETY