AMR Almemo 5590-2 V5, Руководство по эксплуатации

Страница: 43 / 56

The content of the data memory can, using measuring points, be provided as
output to the display and the analogue output or, using cycles, be provided as
output to the serial interface. The output channel is relevant in this context.
Output to the Display and to the Analogue Output
select output channel: display: ´ - ´
analogue output: ´ S ´
select the desired measuring point
obtain first meas. value on the display
PRINT
recall individual measured values
MANUAL
start automatic output PRINT
display (´ - ´): 1 value/s
recorder output (´
S
´): 2 values/s
cancel automatic output STOP
recall individual measured values
MANUAL
re-start automatic output PRINT
cancel automatic output
STOP
During the memory output the green control lamp
“
MEMORY will be on for
control purposes. At the end a ±20-digit notch is written on a recording device.
The output can be repeated for each further measuring point.
Output to the Serial Interface
select output channel: ´
U
´
set the output format: e.g. ´
Un
´
start the automatic output
PRINT
cancel automatic output STOP
recall individual measured values
MANUAL
re-start automatic output PRINT
cancel automatic output
STOP
During the memory output the display will indicate
´Output´
and the green
control lamp “
MEMORY
will be on. The memory content is provided as output
with the same printouts as used for an output via printer and, if necessary,
several times and in different formats (see manual 6.6.1).
Printout:
MEMORY:
NUMBER: 12-001
(when activated)
DATE: 12.03.90
List format 12:30:00 01: +0012.0 °C NiCr Designation
02:!+0008.8 °C NiCr Water
03:>+125.00 °C Ntc Motor oil
OUTPUT CYCLE
MEMORY
OUTPUT CYCLE
MEMORY
ALMEMO
®
5590-2 42
Data Memory