AMR Almemo 5590-2 V5, Руководство по эксплуатации

Страница: 40 / 56

7.3.6 Start and Stop by Limit Values
Another possibility for starting or stopping a data logging automatically is the
triggering by the exceeding of limit values (see manual 6.6.3). The
allocation
of the start or stop command to a limit value can be performed in switch
position LV:MAX or LV:MIN. The additional function
Action max
or
Action min
can be activated with using the key FUNCTION .
Function ACTION MAX and ACTION MIN:
LV:MAX
action cleared:
01:Action max - - -
The activation of the actions ´Start´ or ´Stop´ is performed by pressing the
key ENTER and selecting with the keys and .
The symbols ´
Start
´ or ´
Stop
´ will start flashing.
The programming can be terminated by the key
ENTER
.
Action START at LV:MAX of channel 1:
01:Action max Start
7.3.7 Averaging
The average value of the measured value is required for various applications:
e.g. - smoothing of a largely varying measured value (wind, pressure etc.)
- hourly or daily average values of weather data (temp., wind etc.)
- as above, of consumption values (current, water, gas etc.)
An averaging process for the measured values of measuring point scans can
be programmed for each measuring point (manual 6.7.4).
The
average value can be indicated and programmed at switch setting
AVG:VALUE.
Function AVG.VALUE:
AVG.VALUE
01:Avg.value: 173.5°C
Average values must be cleared before each measurement and for
programming. The
clearing of an average value is performed after selecting
the input channel by using the key CLEAR or by a total clearing (see 7.).
The type of averaging is determined through the averaging mode:
39 ALMEMO ® 5590-2
Cyclic Measuring Point Scan