AMR Almemo 5590-2 V5, Руководство по эксплуатации

Страница: 39 / 56

7.3.4 Time and Date
For recording the measuring time a real time clock with date function has been
integrated into the ALMEMO
®
5590-2. It has a lithium battery so the time and
date are maintained after a switch-off.
Function TIME:
TIME
Time: 12:23:45
The time is programmed in the format
hh:mm:ss
(see 5.4).
The clock can be stopped and set to zero by using the key CLEAR .
The clock can be started in any switch position by using the key
START/STOP
.
Function DATE:
DATE e.g. 1 May, 1999
Date: 01.05.99
The input format for the date is
dd.mm.yy
(see 5.4). The year number can also
be provided with 4 digits via interface (see manual 6.10.13).
Clear the date by using the key
CLEAR .
7.3.5 Time and Date of Start, Time and Date of Stop
A sequence of measurements can, at certain points in time, be automatically
started and stopped. For this purpose, the time and date of the start and the
time and date of the end can be programmed. If no date has been specified
the measurement is performed daily at the specified time interval. The actual
time must be programmed before.
Function TIME OF START:
TIME key:
FUNCTION
Start: - - -
Programming using the format
hh:mm:ss
:
Stop: 07:30:00
Function TIME OF END:
TIME keys: ,
FUNCTION FUNCTION
Stop: 18:30:00
Start date and end date are programmed in the same way in the format
dd:mm:yy
and with the switch positioned on DATE .
The data can be activated or deactivated with using the keys ON and OFF .
ALMEMO
®
5590-2 38
Cyclic Measuring Point Scan