AMQ Solutions ILINE, Инструкции по установке

Страница: 27 / 30

Phase 6 Screens
#6 Allen Wrench
(Angle-tip is recommended)
1
2
3
1
2
3
4
1
2
Place 2 screen clips on top of each beam and
loosely link both sides with a screw and nut.
Insert plastic sleeves into the opening of each
screen clip.
Insert the screen into the screen clip. Make sure
the metal side is down and fabric side is up.
Tightly screw the screen clips with #6 allen
wrench to secure the screens in place.
Repeat Steps 1-4 for each screen.
3
4
5
NOTE: Pre-measuring each clip’s distance
from the beam ends before attaching will
ensure a centered and balanced appearance
to the installed screen. (Suggested distance
between clip and beam edge: 11 inches.)
NOTE:
For 22” or 28” high screens,
metal strip along the length of
the screen should be located
on the bottom when installed.
NOTE:
Frosted glass screens cannot
be used with ILINE.
ILINE 90°/180° (4-Way) Post Installation Guide
27 Please contact cc@amqsolutions.com if you are missing any parts, have difficulty with assembly, or have any product related questions.