AMQ Solutions ILINE, Инструкции по установке

Страница: 22 / 30

Phase 2 Beam Assembly (4 Circuit)
ILINE 90°/180° (4-Way) Post Installation Guide
4
3
2
Type-D
Leave
Blank
Leave
Blank
Type-D
1
2
5
4
3
5
1
2
Place beam upside down on the floor to reveal
the beam canal.
Take 2 receptacles and snap in 1 receptacles on each side
diagonally from each other like in the diagram below.
Position the junction block slightly titled like in the diagram. Lower the
junction block into the beam canal like shown in the diagram. A little
force is needed to push the junction block into position. Make sure the
recepacles sticks out from the beam cut outs.
Take 3 ILINE junction block supporting brackets and position it as shown
in the diagram. Push it down until it can go no further.
3
4
Cover the empty holes with the plastic receptacle covers.
5
22 Please contact cc@amqsolutions.com if you are missing any parts, have difficulty with assembly, or have any product related questions.