AMPTRON 3IBAT, Руководство пользователя

Страница: 53 / 62

53
3IBAT User’s Manual
3-11 PASSWORD SETTING
You can set either supervisor or user password, or both of then. The differ-
ences between are:
supervisor password: can enter and change the options of the setup
menus.
user password: just can only enter but do not have the right to
change the options of the setup menus. When you
select this function, the following message will ap-
pear at the center of the screen to assist you in
creating a password.
ENTER PASSWORD:
Type the password, up to eight characters in length, and press <Enter>.
The password typed now will clear any previously entered password from
CMOS memory. You will be asked to confirm the password. Type the pass-
word again and press <Enter>. You may also press <Esc> to abort the
selection and not enter a password.
To disable a password, just press <Enter> when you are prompted to enter
the password. A message will confirm the password will be disabled. Once
the password is disabled, the system will boot and you can enter Setup
freely.
PASSWORD DISABLED.
When a password has been enabled, you will be prompted to enter it every
time you try to enter Setup. This prevents an unauthorized person from
changing any part of your system configuration.
Additionally, when a password is enabled, you can also require the BIOS
to request a password every time your system is rebooted. This would
prevent unauthorized use of your computer.
You determine when the password is required within the BIOS Features
Setup Menu and its Security option (see Section 3). If the Security option
is set to "System", the password will be required both at boot and at entry
to Setup. If set to "Setup", prompting only occurs when trying to enter
Setup.