AMPTRON 3IBAT, Руководство пользователя

Страница: 19 / 62

19
3IBAT User’s Manual
10.Primary/Secondary IDE Connectors(IDE1 and IDE2)
Primary/Secondary IDE Connectors(IDE3 and IDE4) support Ultra66.
The motherboard supports up to eight IDE devices, including CD-ROM drives,
tape backup drives, Hard Disk Drives, and other IDE devices. After connect-
ing the single end to the board, connect the two plugs at the other end to
your hard disk(s). If you install two hard disks, you must configure the sec-
ond drive to Slave mode by setting its jumper accordingly. Please refer to
your hard disk documentation for the jumper settings. (Pin 20 is removed to
prevent the users inserting the IDE devices in the wrong orientation when
using ribbon cables with pin 20 plugged).
The IDE ports (IDE3 and IDE4) is booting by H.D.D only,The other de-
vice can’t do.
EX.CD-ROM;ZIP;........
Note: Ultra DMA/66 IDE devices must use an 80-wire IDE cable or else
devices will automatically be limited to Ultra DMA/33 mode.
Primary IDE
Connectors
Color:Blue
Secondary IDE
Connectors
Color:Blue
Primary IDE
Connectors
Color:White
Secondary IDE
Connectors
Color:White