Amplicon Liveline PCI230+ Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 42

background image

&

Page 15

6.

On the ‘Completing the Found New Hardware’ screen, Windows should correctly identify the
device as a or . Press ‘Finish’

To install the drivers under Windows XP:

1.

If installing from CD-ROM rather than from the self-extract target directory, ensure the
Amplicon SOFTMAN CD-ROM is in the CD-ROM drive.

2.

When Windows detects the new hardware and opens the 'Welcome to the Found New
Hardware Wizard' page, press 'Next'.

3.

If installing from the CD-ROM, select the 'Install the software automatically (Recommended)'
option. If installing from the self-extract target directory, select the 'Install from a list or specific
location (Advanced)' option. Press 'Next'.

4.

If installing from the self-extract target directory, select the 'Search for the best driver in these
locations' option, deselect the 'Search removable media (Floppy, CD-ROM...)' option, select
the 'Include this location in the search' option, press the 'Browse' button and browse to the
self-extract target directory. Then press 'Next'.

5.

Windows will install the driver and reach the 'Completing the Found New Hardware Wizard'
page.

6.

On the 'Completing the Found New Hardware Wizard' page, press 'Finish'.

To install the example software, rerun Amplicon Softman CD and select the 'Access your manual
and software' button, and then double click on the '32 bit' software button for the /260+.
This will extract and run file AMPDIO.EXE on the SOFTMAN CD. Follow the instructions to install
the samples onto your PC.

2.5

Card Configuration

2.5.1

Base Address Selection

The plug and play BIOS and/or operating system automatically sets the board’s base address
when the system is started.

2.5.2

Interrupt Level Selection (IRQ)

The interrupt signal from each channel can be assigned to any appropriate IRQ available in the
PC. The Plug and Play BIOS and/or operating system automatically sets the board’s IRQ level
when the system is started.

The interrupt operations comply with the requirements laid down in the PCI Bus version 2.2
specification, allowing full IRQ sharing.

The PCI bus assigns PCI interrupts to PC IRQ levels and allows multiple PCI interrupts to share
the same IRQ. The same IRQ level can be shared with other PCI boards in the PC.

The interrupt request line, signals the host PC (Permanent Master) that the /260+ board
requires service. The host PC acknowledges the interrupt and performs the required action using
the appropriate interrupt service routine.

«
...
13
14
15
16
17
...
»

Содержание PCI230+











































Отзывы:

Нет отзывов

Похожие инструкции для PCI230+

Бренд: Magnavox Страницы: 26

Бренд: 2easy Страницы: 12

Бренд: 2easy Страницы: 30

Бренд: Dahua Страницы: 23

VTO2000A Series

Бренд: Dahua Страницы: 41

Бренд: Dahua Страницы: 85

TLX-7000-FLRAILKIT

Бренд: IDEAL Страницы: 10

Бренд: ENTRYPASS Страницы: 27

Бренд: NCR Страницы: 12

Бренд: birddog Страницы: 30

WAGO-I/O-SYSTEM 750-424

Бренд: WAGO Страницы: 12

Бренд: Danfoss Страницы: 12

Бренд: Senju Sprinkler Страницы: 8

Бренд: XceedID Страницы: 2

Бренд: Mec Страницы: 48

Бренд: Kontron Страницы: 2

Бренд: Auta Страницы: 6

Бренд: M-E Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды